What is the Mimaki TxF330-800?
Mimaki describes the TxF330-800 as its new flagship production DTF printer for textile and apparel decoration. It uses the company's 330-series print engine and is rated at approximately 1.5 times the productivity of the previous TxF300-75 in the CMYK+white configuration.
The printer supports media up to 810mm wide with a maximum print width of 800mm. For decorators producing gang sheets, that additional width can create more layout options, although the commercial benefit depends on the artwork mix and downstream workflow.
Longer runs are a major part of the launch
The system uses 16 ink cartridges, with up to eight white-ink slots providing roughly 4 litres of white-ink capacity. Mimaki says this is intended to support a full 100-metre roll of DTF film without stopping for white-ink replenishment under suitable production conditions.
Its Uninterrupted Ink Supply System can switch cartridges automatically, allowing an empty cartridge to be replaced while printing continues. That targets a practical high-volume problem: rated speed matters less if operators repeatedly stop production for ink changes or maintenance.
White ink remains central to DTF productivity
White ink provides the opaque base behind colour on dark and coloured garments, but its pigment makes maintenance particularly important. Mimaki's TxF platform includes automated maintenance and white-ink management features intended to support stable output.
Commercial buyers should still examine cleaning ink consumption, idle-time procedures, restart reliability and operator attention because these factors can influence real cost per transfer as much as headline speed.
New film transport targets long-job consistency
Mimaki has introduced a new film-transport control system intended to maintain accurate media feeding during extended runs. Even small transport errors can accumulate across a long roll, affecting registration and downstream powdering, curing and take-up.
Stable film movement is therefore important if a printer is expected to run long queues with limited intervention.
Sky Blue and Pale Pink expand the colour option
The TxF330-800 can also be configured with a six-colour set adding Sky Blue and Pale Pink. Mimaki says these inks expand reproduction of vivid pinks, greens and other apparel colours.
Expanded gamut can be useful for fashion graphics and creator merchandise, but the final appearance still depends on artwork, RIP profiles, film, garment colour and heat-press conditions. Businesses should compare the visual benefit with the added profiling and production requirements for their actual jobs.
UK debut confirmed for The Print Show
Mimaki confirms that the TxF330-800 will be shown at The Print Show, NEC Birmingham, from 29 September to 1 October 2026. UK trade publication Digital Printer reports that UK and Ireland distributor Hybrid Services will demonstrate it at the event.
That gives UK decorators an opportunity to evaluate realistic output, white-ink maintenance, film tracking, RIP workflow, ink consumption, curing integration and local technical support shortly after launch.
Why 800mm DTF could matter
Commercial DTF has commonly centred around desktop systems and approximately 60cm roll equipment. An 800mm platform creates another production tier. More width can potentially improve gang-sheet utilisation and increase output per linear metre of film for suitable artwork.
But faster transfer production only helps when powdering, curing, cutting and heat-press capacity can keep up. Buyers should therefore measure productivity from approved artwork to finished garment, not only the speed at which film exits the printer.
DTF is increasingly a workflow competition
The 2026 DTF market is shifting toward longer media runs, automated maintenance, larger ink capacity, improved film transport, better nesting and less operator intervention. This reflects DTF's transition from an emerging decoration method into a mature production category.
Two machines with similar headline output can create very different labour and downtime costs depending on cleaning routines, media handling and workflow integration.
What should UK decorators compare?
Before investing, businesses should model realistic daily transfer demand, common artwork dimensions, usable media width, ink and film consumption, white-ink maintenance, curing and heat-press capacity, operator time, ventilation, spare-parts availability and downtime risk.
A wider, faster printer makes the strongest commercial case when existing demand is already constrained by production capacity. Buying capacity far ahead of sales can tie up capital without improving profitability.
What this means for custom-clothing customers
Customers ordering custom T-shirts, hoodies, workwear or sportswear do not need to choose the printer behind their order. They experience production technology through print quality, colour, consistency, garment choice and turnaround.
DTF also does not replace every other method. DTG can remain an excellent fit for detailed designs on suitable cotton garments, embroidery provides a stitched finish, and screen printing can be highly efficient for larger repeated runs. The professional decision remains to match the method to the garment, artwork, quantity and finish.
Search opportunity around the TxF330-800
Because the printer was announced on 8 September and its UK demonstration is confirmed, there is a fresh search window around Mimaki TxF330-800, TxF330-800 UK, Mimaki DTF printer UK, 800mm DTF printer and The Print Show 2026 DTF.
Current results are concentrated around Mimaki's announcement and specialist trade coverage, leaving room for timely UK editorial content answering what changed, where the machine can be seen and which production problems it is designed to solve.
The bottom line
Mimaki announced the TxF330-800 on 8 September 2026, adding an 800mm production DTF system with approximately 1.5x the productivity of its previous model, expanded white-ink capacity, automatic cartridge switching, improved long-run film transport and an optional six-colour ink set with Sky Blue and Pale Pink.
The machine is scheduled for its UK showcase at The Print Show in Birmingham from 29 September to 1 October.
For UK garment decorators, the broader signal is that DTF competition is increasingly moving toward stable continuous production, reduced operator intervention and better utilisation of the complete workflow.
